Premium job simulation
Control Panel Design Engineer job simulation, Premium
The whole project, days 1 to 20, at Calderfield Panel Systems Ltd (simulated company). A capstone reviewed by an engineer, an AI viva and the graded certificate, included. Practice, not employment.
You buy Premium from inside your simulation once you have started, so you can look before you pay. Your free days carry over.
- Price, VAT included
- £53.99
- Length
- Days 1 to 20
- All tickets
- about 33 h 10 min
- If you bought the certificate
- £39.00
Everything in Free, plus
The same project, taken all the way
You keep the free days: every ticket, the documents and the model answers. Premium continues the Control Panel Design Engineer project to day 20.
Days 6 to 20
The project goes on: a change request, site work, faults and a handover, ticket by ticket.
A capstone reviewed by an engineer
You hand in a finished deliverable and an engineer reviews it against a rubric.
An AI viva on your own work
Questions written from your own hand-ins, answered in text and scored.
The graded certificate
A score and band, a verification page and a QR code. It is included, so you pay for it once.
A work record PDF
Your skill scores and logged hours in one document, with the simulated company named.
The plan
Days 6 to 20, ticket by ticket
About 22 h 55 min of tickets after the free days. Self-paced: a day opens when you hand in the previous day's tickets.
Day 6
about 1 h 20 min- IEC 61439 design verification: the route for each characteristicTable · 1 h 20 min
Day 7
about 1 h 10 min- Approve the alternative contactor?Table · 1 h 10 min
Day 8
about 1 h 40 min- Change impact note: the client's drive replaces the specified oneWriting · 1 h 40 min
Day 9
about 1 h 30 min- Recalculate the heat and the spare area with the client's driveCalculation · 1 h 30 min
Day 10
about 1 h 20 min- Check the revised GA Rev D before releaseDocument review · 1 h 20 min
Day 11
about 1 h 40 min- Wire and commission the drive: mains, motor, safe torque offHand-in · 1 h 40 min
Day 12
about 1 h 30 min- Fault-find a starter that will not run on the test benchHand-in · 1 h 30 min
Day 13
about 1 h 20 min- Routine tests: pass or fail for each circuitTable · 1 h 20 min
Day 14
about 2 h 10 min- Ship on Friday with a failed insulation test?Decision · 40 min
- Write the non-conformance reportWriting · 1 h 30 min
Day 15
about 1 h- Does the heat calculation match the heat run?Calculation · 1 h
Day 16
about 1 h 20 min- Check the routine test certificate before it is signedDocument review · 1 h 20 min
Day 17
about 1 h 10 min- IEC 60204-1 walk-round: does each item comply?Table · 1 h 10 min
Day 18
about 4 h- Capstone: the design packHand-in · 4 h
Day 19
about 1 h- Voltage drop on the site cablesCalculation · 1 h
Day 20
about 45 min- A conversation about your own workViva · 45 min
Real documents
The documents that arrive in Premium
A change request, vendor data, records from site and the handover requirements. Each has a number and a revision.
PNL1042-DVR-001
Design verification record, IEC 61439
Rev ADesign verificationPremium
PNL1042-ALT-001
Request to approve an alternative contactor
Rev AAlternative part approvalPremium
PNL1042-ECR-001
Client change: drive VSD-1 replaced after procurement
Rev AChange requestPremium
PNL1042-GA-001
General arrangement, door and mounting plate, drive changed
Rev DGA drawingPremium
PNL1042-FAT-001
Routine verification record and heat run, draft
Rev ATest recordPremium
PNL1042-NCR-001
Non-conformance facts from the factory test
Rev ANon-conformancePremium
PNL1042-RTC-001
Routine test certificate and rating plate data, draft
Rev ARoutine test certificatePremium
PNL1042-CHK-001
Machine panel check against IEC 60204-1, facts as built
Rev ACompliance checklistPremium
PNL1042-HOV-001
Design pack handover requirements
Rev AHandover indexPremium
Free, certificate or Premium
Compare the three
Premium includes the certificate (£14.99 on its own). All prices include VAT.
| What | Free | Certificate (optional) | Premium (optional) |
|---|---|---|---|
| Price, VAT included | Free | £14.99 | £53.99 |
| Length | Days 1 to 5, self-paced | For the days you complete | Days 1 to 20 |
| Checked tasks and model answers | |||
| Graded, verifiable certificate | |||
| Capstone reviewed by an engineer | |||
| What you get |
|
|
|
Buy the certificate first and Premium credits it: you then pay £39.00. Nothing is sold inside the work. Certificates are issued by WARTENS LTD and are not accredited qualifications. Job simulation certificate: how it works.
No pressure
Start free and upgrade any time
Your free days carry over. Start free today and upgrade when you are ready. What you paid for the certificate is credited against Premium for the same simulation.
Before you pay you accept our terms and confirm that you want the digital service straight away; the 14-day right to cancel ends once it is supplied. See the refund policy.
Questions
Quick answers
What does the Premium Control Panel Design Engineer job simulation add?
Days 6 to 20: change requests, site work, faults and a handover, then a capstone deliverable reviewed by an engineer and an AI viva on your own work. The graded certificate and a work record PDF are included.
How much is it?
£53.99 including VAT, paid once. If you bought this simulation's certificate (£14.99) first, you pay the difference, £39.00.
Can I start free and upgrade later?
Yes. Days 1 to 5 are free, and your answers carry over if you upgrade. You buy Premium from inside your simulation once you have started.
How long does it take?
It is self-paced. A day opens when you hand in the previous day's tickets. All the tickets together are about 33 h 10 min, and your logged hours are the active hours you spend on EDWartens.
Who reviews the capstone?
An engineer reviews your capstone deliverable. The company, client and site in the story are fictional, and the people in the story are roles, not real people. We do not promise a particular result.
Is the certificate an accredited qualification?
No. It is issued by WARTENS LTD as a certificate of a training project. A job simulation is a realistic training project at a simulated company. It is not employment, an internship or a work placement, and it is not a job offer. Hours are active hours the learner logged on EDWartens UK. The simulated company is named on it.
Can I get a refund?
You agree at checkout that you want the digital service straight away, and that the 14-day right to cancel ends once it is supplied. Our refund policy covers faults and anything else.
Control Panel Design Engineer job simulation, Premium
The certificate is included. Practice, not employment.