The best preparation for an automation engineer interview is to turn the job advert into a list of questions, then answer each with a real project of yours. Most UK interviews combine a technical conversation, a practical element and a behavioural round, and the people interviewing are usually engineers who want to know how you think when something is broken.
What happens in a UK automation engineer interview?
Expect two stages for most roles: a screening call, then a technical interview with the engineering manager and a colleague, sometimes with a practical task. Integrators and machine builders lean towards practical tests, while end users such as food, water or pharmaceutical sites lean towards fault-finding and safety discussions.
| Stage | What is being checked | How to prepare |
|---|---|---|
| Screening call | Right to work, location, pay range, platforms | Know the advert, your notice period and a salary range |
| Technical interview | Concepts, fault-finding, platforms, safety | Rehearse 5 to 6 project stories and the 50 PLC questions |
| Practical task | Reading drawings, writing or fixing a program | Practise small programs in a simulator and talk while you work |
| Final or panel | Fit, communication, travel and shift pattern | Prepare questions about the team and site |
How should you prepare before the interview?
Read the advert line by line and write one example from your own work next to each requirement. The National Careers Service advises reading the job description closely, researching the company and preparing examples from past experience. For an automation role that means three extra steps.
- Find the platform. If the advert says Siemens TIA Portal or Studio 5000, revise that environment's block structure, addressing, diagnostics and commissioning workflow.
- Learn the site. What does the company make or treat, and what would stop the line? A food plant cares about hygiene and changeover, a water site about uptime and telemetry.
- Refresh fundamentals. Scan cycle, analogue scaling, wiring conventions, PID basics, communications and safe isolation come up even for senior roles.
What technical questions should you expect?
Expect a mix of definitions and scenarios, and the scenarios decide the outcome. Typical ones are how you would find the cause of an intermittent stop, how you structure a project for reuse, how you test before a machine ships, and what you do about a sensor giving unreliable readings. For wording and model answers, work through our question bank.
A strong scenario answer follows a pattern: state your first safe step, say what evidence you would collect, split the problem into halves, and finish with the permanent fix and the diagnostic you would add. This CareerVidz video on general engineering interview questions shows how structured answers sound.
How do you handle a practical test?
Talk through your reasoning, start with the I/O list and keep the first version simple. Typical tasks are a motor start-stop with overload and emergency stop, a tank level controller with high and low alarms, or finding the error in a ladder rung or wiring diagram. Practise these in the free ladder logic simulator and the PLC simulator, where you can write a program for a working machine in the browser.
If you get stuck, say what you would check next. Interviewers mark how you recover, and silent struggling reads worse than a clear "I would test this input first".

How do you answer behavioural questions using STAR?
Use the Situation, Task, Action, Result structure and keep the result measurable. The National Careers Service interview advice points to the STAR method for structuring answers. An example answer for fault-finding might run like this.
- Situation: a packaging line stopped about twice a shift for no clear reason.
- Task: find the cause without extending downtime.
- Action: compared stop times with the diagnostic buffer and found a drive losing its network connection, traced it to a damaged cable and replaced it.
- Result: the stops ended, and an alarm for lost communication was added so the next one is obvious.
Use your own facts. Invented stories fall apart at the first follow-up question.
Prepare stories for tight deadlines, disagreements, learning a new platform, and a time you made a mistake. Safety deserves its own story: interviewers listen for people who stop work when something looks unsafe.
What should you ask the interviewer?
Ask about things that change your daily life. Good questions are what the first three months look like, which platforms and versions are in use, how changes are controlled and backed up, how out-of-hours support works, what training budget exists, and what the biggest current problem on site is. Write them down beforehand, as the National Careers Service suggests.
How should you handle the salary question?
Know the market range and give a range, not a single number. According to ITJobsWatch (permanent UK adverts, six months to 21 October 2026), the median advertised salary for a PLC engineer is £60,000, with a 10th percentile of £42,500 and a 90th percentile of £65,000, from 144 adverts. ITJobsWatch is an IT-focused index with small samples, so cross-check with adverts for your region and level. Our PLC engineer salary guide has more context.
What happens on the day and afterwards?
Arrive early, bring a notebook, copies of certificates and a portfolio on a tablet or printed. Wear what suits the site, and be ready to wear PPE on a tour. Afterwards, send a short thank-you the same day or the next, and ask what happens next. If you fail a technical question, note it and revisit it that evening; it is the cheapest revision you will get. Building a portfolio gives you something concrete to show.
How do integrator and end-user interviews differ?
Integrators and machine builders test speed and breadth; end-user sites test judgement and safety. An integrator wants to know you can read a specification, program to a standard, document and commission on a customer site, often with travel. Expect questions about templates, version control, FAT and SAT, and working under pressure with a deadline.
An end-user plant such as a food factory, a water treatment works or a pharmaceutical site cares more about keeping production running. Expect fault-finding scenarios, change control, shift patterns, on-call rotas and how you would work with operators and maintenance technicians. Pharmaceutical roles may also ask about validation and documentation discipline. Read the advert for clues about which type of employer it is, and weight your stories accordingly.
What if the interview is on Microsoft Teams?
Treat it like a site visit with a screen share. Test your camera, microphone and connection beforehand, and keep a second device ready. For a practical task, ask whether you may share your screen and which software to use, close unrelated windows and speak your reasoning aloud, because the interviewer cannot see you thinking. If they show a program or schematic, ask for a moment to read it before answering. Keep a notebook and your portfolio files open so you can show a project quickly.
How should you talk about safety?
Show that you stop and ask when something is not safe. Interviewers in industrial settings listen for evidence that you isolate before working, respect lock-out procedures, test safety functions rather than assume them, and raise concerns about unsafe designs. A good short example is the time you refused to force an output on a live machine, or insisted on testing an emergency stop after a change. If you have not met a safety scenario at work, describe how you would treat one, and make sure you can explain the difference between a normal stop and an emergency stop, and why stop buttons are wired normally closed. Our question bank covers these basics.
How EDWartens can help
The Professional Module (£2,140 + VAT = £2,568; five-day live online class plus self-paced Basic Engineering) includes 3 one-to-one profile sessions (resume, LinkedIn and job profile) and 5 interview-preparation sessions with our engineers, plus 7 role-specific CV templates. There is no job guarantee; it is support to help you prepare. Start free with the lab simulators, or see /courses/professional and /signup.





